SWP-99
The SWP-99 indicator is intended for measuring and presentation of current values from 8 measuring channels. Each channel can be individually designated (described) with any measuring unit. The LCD graphical display allows for visualization of the values from all 8 channels simultaneously. A significant advantage is possibility of viewing the trends in each measuring channel as the graphs for the last 12 seconds or about 1,5 minutes. Device is equipped in electronic relay outputs that can be used to control external devices. There are icons on the screen signalling the status of the outputs.
The device supports S-Toolkit software – free in «Download» section.
Parameters
| Power supply | 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC |
|---|---|
| Outputs | 2 electronic relays, NO type (ER1, ER2) with max. load 24V AC (35V DC) / 200 mA, overload protection |
| Measurement range | ± 9999 + decimal point |
| Power consumption | typical 7 VA; max. 12 VA |
| Input | 2, 4 or 8 inputs 0/4-20 mA, common earthing |
| Stability | typ. 50 ppm/°C |
| Communication interface | RS-485, 8N1 and 8N2, 1200 bit/s ÷ 115200 bit/s, Modbus RTU (isolated from measuring inputs) |
| Storage temperature | -10°C ÷ +70°C |
| Operating temperature | 0°C ÷ +50°C |
| Accuracy | ± 0,25% ± one digit in the entire operation range |
| Case material | NORYL- GFN2S E1 |
| Case dimensions | 96 x 96 x 100 mm |
| Case | panel mounting |
| Protection class | IP 65 (front), available options: additional frame IP 65 for panel cut-out sealing, transparent door STD-99; IP 20 (case and connection clips) |
| Panel cut-out dimensions | 90,5 x 90,5 mm |
| Display | with backlighting, graphic LCD, 128 x 64 points |
| Software | The device supports S-Toolkit software – free in «Download» section. |
| Installation depth | min 102 mm |
