SPI-N118
SPI-N118 are the flow meters in tight, wall mounted case (IP 67), designed to work in tandem with the pulse flow transducers with coefficients ranging from 0,01 to 9999,99 pulses per litre, equipped with electronic (open collector) or contact input. A flow counter allows to measure the actual instantaneous value and to record the total flow of fluids, gases or bulk materials. Wide range of total flow (up to 16 significant digits) enables flow volume control for a long time. Build in a batcher function makes possible application of SPI-N118 in a wide range of industry branches (food production, pharmacy, paint and varnish). The REL / OC control outputs can be programmed depending on the instantaneous value of rotational speed. Additionally the counter may be equipped with analogue outputs, according to the customer selection: active current output, passive isolated current output or active voltage output. The counter may be configured with no need to open the case, by using the remote controller or with free S-Config software via the RS-485 communication port.
Parameters
| Power supply | 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC, all separated |
|---|---|
| Measurement range | 0 ÷ 999999 + decimal point |
| Power consumption | for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 5 VA; for 19V ÷ 50V DC power supply: max. 5 W |
| Input | pulse, fully isolated; zeroing of batcher counter, zeroing of total counter and counting blockade: active edge or level; pulse input counting input with debouncing filter and pulse width control, max. input frequency 10.0 kHz |
| Data memory | non-volatile memory, EEPROM type |
| Communication interface | RS-485 / Modbus RTU (not galvanically isolated) |
| Analogue outputs | (available with 2 x REL or OC, see ordering): active current: operating range 0/4-20 mA (max. 0-24 mA), load resistance 700 Ω max., resolution 13 bit passive current: isolated, operating range 4-20 mA (max. 2,8-24 mA), load resistance 600 Ω@24VDC, resolution 13 bit; active voltage: operating range 0/1-5V, 0/2-10V (max. 0-11V), load resistance min. 2000 Ω, resolution 13 bit |
| Output | 0 or 2 relays 1A/250V AC (cos fi=1) or the OC 30mA/30VDC/100mW; transducer power supply output: 24V DC +5%, -10% / max. 100 mA, stabilized |
| Transmission parameters | 1200 ÷ 115200 bit/s, 8N1 and 8N2 |
| Storage temperature | -10°C ÷ +70°C; -20°C do +70°C (depending on version) |
| Operating temperature | 0°C ÷ +50°C (standard), -20°C ÷ +50°C (option) |
| Accuracy | instantaneous flow values: selected in the range 0 ÷ 0,00000; balance accuracy: selected in the range from ± 1 to ± 0,0001 |
| Weight | 350 g |
| Case dimensions | without glands: 110 x 80 x 67 mm; with glands: 110 x 105 x 67 mm |
| Case | wall-mounted |
| Protection class | IP 67 |
| Display | LED, red, 6 x 13 mm high, with 8-step adjustment of brightness |
| Pulse waiting time | settable from 0,1 do 39,9 seconds |
| Instantaneous flow unit | l or m3 per second, minute or hour |
| Instantaneous flow precision | selected from range: 0 ÷ 0.00000 |
| Total flow unit | I or m3 |
| Total flow precision | selected from range: 0 ÷ 0.000 |
| Total flow capacity | over 4 x 10^9 pulses (max. 16 significant digits) |
